Hi everyone! Just a short visit this week to introduce my new pattern called Summer Serendipity.
This is a 36 x 36″ wall hanging or table topper. It a fun, scrappy pieced background embellished with some beautiful floral appliqué. And this appliqué can be done by hand or machine! You can also substitute wool for the fabric and use this background for some colorful wool appliqué. You can go here for purchasing information.
The pieced background is easy piecing that uses a lot of half-square triangle squares. Do not be intimidated by these! Half-square triangle squares, or as I call them, HSTs, are really not that hard and come out accurately every time if you follow my tips.
Tip #1: For this project, I use the method of making HSTs that uses 2 squares, one color print and one tan print. I’m going to use the squares the size I need to make HSTs that measure 2 1/2″ when I’m done. So start with your squares either 2 7/8″ x 2 7/8″ OR, if you don’t mind wasting a tiny bit of fabric and want to make sure your finished squares are the correct size, you can start with squares that measure 3″ x 3″.
Draw a diagonal line on the wrong side of the tan print square:
Then place the tan print and the color print squares right sides together with the tan print square on top so the drawn line is visible.
Tip #2: Now comes the time to stitch. I like to stitch with a scant 1/4″ on each side of the drawn line, especially if I am using squares cut 2 7/8″:
Using the scant 1/4″ distance guarantees your squares will not be too small when you press them open because you can always trim them.
Tip #3: Now we come to the trimming. Cut the above unit apart on the drawn line. You will have two units. Do not press them open yet. We will actually trim them before pressing. The great thing about that is you are only having to make two trimming cuts instead of have to trim all four sides individually!
Here’s the unit cut apart:
Now I will introduce you to this awesome tool I like to use for the trimming. It’s called the Quilt in a Day® Triangle Square Up Ruler!
Here it is and how it works:
The numbers on the measurement lines are the size of the HST you want after it’s pressed open. Ours are going to be 2 1/2″ after trimming so we use the 2 1/2″ line on this ruler. First place the ruler on one of the units from above with the 2 1/2″ line on the stitch line:
Now you trim off the excess fabric on the two sides. Once you do this, you can press open the unit and here you are:
It’s that simple! Since each set of squares makes 2 HSTs, if you need 40 HSTs you need 20 squares of tan print and 20 squares of color print.
Now you can make HSTs with ease and make many of my patterns that use HSTs!
Candy Sharpe says
Thank you !!
Love all your creative quilts you design ,.
The new ruler you are showing is great, half square triangles ALWAYS fit and you never lose your points when they are made bigger and then cut down !
Thank you for sharing with great photos and clear instructions .