One of the fun parts of quilting is picking out fabric. Many quilters only consider the color of the fabric when making their choices. But prints in the fabric can be just as fun to play with. It’s another element of the fabric that is often overlooked. Also, this can play into the design in the blocks and how they play off each other. You’d be surprised on how prints can also change the nature of a block. Let’s get started!
Picking out Block Fabrics
What happens when you have a pattern that uses a specific fabric that is no longer available? I think this is the best time to concentrate on the print. If you choose a fabric that is close to the color of fabric in the original quilt, but you choose one with a larger or smaller print it may look very different. If that’s what you’re going for…OK. But if you want the same look, choose a fabric with a similar print in the same scale on fabric that has a similar shade.


Here are two orange prints on the right. Which one would you choose to put in the block? To me the top one is closer to the one in the block because of the size of the print. The fabric on the bottom is really nice too, but the print is a little larger and bolder than the original. If I used that one, I would probably look for a tan fabric that had a smaller print than in the original block to avoid the clashing of prints.
Picking Out Background Fabric
You can venture out from the typical background of a solid light tan or white. For instance, if you want to really have fun, try using a different tan prints in each of your blocks like I did with this scrap quilt, Sun Catcher:


The enlargement of the 4 blocks on the left shows how I used two different tan prints in each block. When you pull back and look at the whole quilt, it shows how that technique adds to the scrappiness of the quilt. I also used a different tan print for the sashing and another for the pieced outer flying geese border.
I actually started this fun technique out of necessity on an earlier quilt when I found I didn’t have enough of the same tan print for the sashing and the outer pieced border and I didn’t want to make a trip to the quilt shop.
Here’s how you can do this with a quilt project of yours if you want. If your quilt calls for 2 yards of a tan print for background of blocks, consider buying 4 half yards or 8 quarter yards of coordinating tans to make up that 2 yards. Then you can use different backgrounds with the variety of color print pairings for blocks to make a scrappy background.
How Prints Change a Block
The scale of prints you choose for a block and it’s background can also change how someone who views the quilt will notice the blocks. I also played with that in the above quilt. Here’s two of the blocks side by side:

Notice how the prints in the block on the left are a bit bolder than the ones in the block on the right. Because block on the left’s the star and background have bolder prints, I chose a more subtle print for the border tan. On the right, the border tan is a bolder print since that block’s interior is a little quieter. It’s my way of adding balance to a block.
Here’s another example from my quilt, Sister’s Reunion:

The first thing you notice about the quilt, I alternated between dark and light color fabric prints for the block backgrounds. That another way to have fun with backgrounds. Now here’s a close-up of two of the blocks:


Both of these blocks have a darker background and lighter fabric for the inner pieced portions. But for the block on the left, both the light print and the color print and busier and draws your attention more. The block on the right is quieter because both fabrics have comparably quieter prints.
Here’s two more blocks from that quilt, one with the light background and one with the dark to show you how they each play off each other.

Placing these blocks next to each other in a quilt creates more contrast because of the dark and light backgrounds.
Here’s a few other examples of alternating between dark and light background prints for another way to play with color and prints:



Testing it Out While Shopping
Here’s a little exercise you can do when picking out backgrounds and fabrics for a block or entire quilt. You can use smaller cuts of fabric in the quilt shop (like fat quarters) or stack bolts to do this. Here’s three examples:



The background fabric on the left is a large, bold print that will probably clash with the prints in the color print fabrics. If you decide to use this background fabric, it will be the “star” in your quilt with such a bold print, so make sure that is your intention. I would choose a different set of color prints with smaller scale prints to go with that background. Or solids.
The middle photo has background fabric that works a bit better with the color prints because of a more subtle print even though it’s still prominent. The background is still a little more busy but, depending on the block design, it could work with the color prints without clashing.
Finally, the background fabric in the last photo has a smaller print with has a more tone on tone color scheme. The smaller scale of the print reads more as a solid than a print. Because of this, it does not clash with any of the prints of the color fabrics and truly acts as a background. Definitely the safest of the choices.
Something to think about next time you’re shopping for fabrics. Look at prints as well as the colors. You can change the personality of a block by doing this. If you don’t want to do it with new fabric, consider making blocks with scrap fabrics, mixing and matching color and print, to make some sample blocks.
That’s it for this week. Leave a comment or ask a questions below and I will enter you into a drawing for my quilt, Sun Catcher. The drawing will be on Monday, October 19th. **We have a winner! Congrats, Cora Wilfinger!***
Happy Quilting!
Deanne


